fbpx

VELOCEX 65

–Sequential control of the machine is by PLC & Colour touch screen HMI: located at the front-bottom for easy operation and maintenance, HMI display feature lot size programmed & cut
completed, program number in use, current drawn by motor with adjustable overload shut-off, feed rate, load per tooth, blade speed, number of cuts to be cut, job size, cut length can be set, cutting time, cycle time & number of cuts completed.
For sections and tubes special feature of slow entry and slow exit is possible to program.

MINIMUM USE OF RESOURCES TO MAXIMIZE PROFIT!

VELOCEX LINE – HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES: WITH TUNGSTEN CARBIDE TIPPED or cermet blades, HIGH PRODUCTIVITY, GOOD FINISH, PRECISE LENGTH AND BURR FREE CUTS CAN BE OBTAINED ON CONTINOUS BASIS!

VELOCEX 65: CIRCULAR MACHINES > AUTOMATIC > CARBIDE TIPPED BLADE 0° cuts, suitable for metals, ferrous & non-ferrous materials to cut solid / structural – section round / square / rectangular / hollow tubes at 0°

–Sequential control of the machine is by PLC & Colour touch screen HMI: located at the front-bottom for easy operation and maintenance, HMI display feature lot size programmed & cut
completed, program number in use, current drawn by motor with adjustable overload shut-off, feed rate, load per tooth, blade speed, number of cuts to be cut, job size, cut length can be set, cutting time, cycle time & number of cuts completed.
For sections and tubes special feature of slow entry and slow exit is possible to program.
> Colour touch screen HMI (Mitsubishi).
> “Set up wizard” for easy set up of jobs.
> 200 program can be saved with 12 digit alpha numeric name.
> Comprehensive US steel grades menu with capability to program additional custom material grades.
> Job monitoring with cycle time, job duration, parts count, tool life counter.
> Up to 5 different cut off lengths per bar.
> Bar optimization by repeating same sequence per bar.
> Manual operation for all moveable units and easy control.
> On the fly length correction, after pause. Also PTL & saw speed can be changed.
> Auto home facility to achieve-conditions for automatic operation.
> Error codes displayed with explanation of problem.
> For hollow sections special features such as slow entry, slow exit is provided.
> Diagnostics of all input, outputs and axis parameters.
After every cut, saw does not return back till bar stock and cut piece moves away from the saw so that blade teeth do not touch material on return stroke to optimize tool life.